E-24
GETTING ACQUAINTED
Lens Precautions
• Fingerprints, dust, or any other soiling of the lens can inter-
fere with proper image recording. Never touch the lens with
your fingers. You can remove dust particles from the lens
surface by using a lens blower to blow them off. Next, wipe
the surface of the lens with a soft lens cloth.
• The lens of this camera extends from its body when you
turn on power and retracts when you turn off power. Take
care not to subject the lens to undue force or impact, and
never set the camera face down so the lens is in contact
with a tabletop, etc. Be sure to remove the lens cap before
turning on the camera.
• If you align the POWER/Function switch with REC while
the lens cap is on the lens, the message “LENS CAP!” ap-
pears on the display and camera power turns off automati-
cally. If this happens, remove the lens cap and try again.
• Never remove the camera’s batteries or unplug its AC
adaptor while the lens is extended. Doing so leaves the
lens extended, and creates the risk of lens damage.
To Next Page
Loading...
Need help?
General
