GETTING ACQUAINTED
E-39
2.
With the side of the
memory card marked
with an arrow facing
the same direction as
the camera’s monitor
screen, slide it into the
slot and push it in as
far as it will go.
• If the eject button is
extended, press it in
before sliding the
memory card into the
slot.
3.
Close the memory card
slot cover.
Side marked with
arrow should face
the same direction
as the monitor
screen!
Eject button
Memory Cards
This camera supports use of a CompactFlash memory card
(CF TYPE I/II) or IBM microdrive for image storage. Note
that all mentions of “memory” card in this manual refer both
to a CompactFlash memory card and IBM microdrive, unless
specifically noted otherwise.
IMPORTANT!
• Make sure that the power of the camera is turned off
before you insert or remove a memory card.
• When inserting a memory card into the camera, make
sure that the card is oriented correctly. Make sure that
the correct side of the card is facing up, and that you
insert the correct end of the card into the camera.
Inserting a Memory Card into the Camera
1.
Open the memory card
slot cover.
Memory card slot cover
To Next Page
Loading...
Need help?
General
