OTHER RECORDING FUNCTIONS
E-87
IMPORTANT!
• Higher sensitivity can increase the chance of noise in
the image.
• Higher sensitivity can make it difficult to obtain proper
focus using Auto Focus. It does not change the mini-
mum brightness required for Auto Focus.
• Regardless of the setting you make here, a sensitivity
setting of ISO 100 is used automatically whenever you
shoot with flash and whenever the S Mode (shutter
speed priority AE) is selected.
Using the Filter Function
The camera’s filter function lets you filter the image with one
of a selection of different colors.
1.
Align the POWER/Function Switch with REC.
2.
Press MENU.
3.
Select “FUNCTION” “Filter”, and then press
SET/DISP.
4.
Select the setting you want, and then press
SET/DISP.
• Available filter settings are: Off, B/W, Sepia, Red,
Green, Blue, Yellow, Pink, Purple
NOTES
• The filter function produces the same effect as if a
piece of colored cellophane paper were held in front of
the lens of the camera. Color enhancement (page E-
90), on the other hand, alters the characteristics of the
image to enhance specific color components.
• If color enhancement (page E-90) and the filter func-
tion are both turned on at the same time, the filter
function is given priority (color enhancement is not
performed).
To Next Page
Loading...
