OTHER RECORDING FUNCTIONS
E-92
Specifying Outline Sharpness
Use the following procedure to control the sharpness of im-
age outlines.
1.
Align the POWER/Function Switch with REC.
2.
Press MENU.
3.
Select “FUNCTION” “Sharpness”, and then
press SET/DISP.
4.
Select the setting you want, and then press
SET/DISP.
To do this
Make outlines sharp
Leave outlines as they are
Make outlines soft
Select this
Hard
Normal
Soft
Specifying Color Saturation
Use the following procedure to control the saturation of im-
age colors.
1.
Align the POWER/Function Switch with REC.
2.
Press MENU.
3.
Select “FUNCTION” “Saturation”, and then
press SET/DISP.
4.
Select the setting you want, and then press
SET/DISP.
To do this
Make colors more intense
Leave colors as they are
Make colors less intense
Select this
High
Normal
Low
To Next Page
Loading...
