SE-S100 / PCR-T285 / PCR-T295
– 24 –
[2] Batch Test 1
[Function]
RAM, printer, time setting, buzzer and drawer tests are performed continuously.
[Operation]
Command :
1
o
Performs the following tests in sequence.
*
Refer to each test item for details.
(1) RAM test
(2) Test print
(3) Time setting: Set the following data.
Arranged data: 2014 December 31, 23:59’30
(4) Buzzer: Ring once the one shot buzzer. No print or display in this test.
(5) Drawer open
(6) Receipt issuance
[Printout of the result]
BATCH 1
RAM WR OK
BBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBBB
DATE 14/12/31
TIME 23:59−30
DRW OK
END 1
Test print
[3] Batch Test 2
[Function]
Main display test and customer display test are performed continuously.
[Operation]
Command :
2
o
Performs the following tests in sequence.
Pressing any key changes the display.
*
Refer to each test item for details.
(1) Main display test
(2) Main display backlight test
(3) Customer display test
[Printout of the result]
BATCH 2
DISP OK
BACK LIGHT OK
DISP OK
END 2
To Next Page
Loading...
