45 Projector RS-232C Control
Lamp Control
Read Light Source Usage Time <CR>*ltim=?#<CR>
Write Normal mode <CR>*lampm=lnor#<CR>
Write Eco mode <CR>*lampm=eco#<CR>
Write 360 & Portrait <CR>*lampm=portrait360#<CR>
Read Lamp Mode Status <CR>*lampm=?#<CR>
Miscellaneous
Read Model Name <CR>*modelname=?#<CR>
Write Blank On <CR>*blank=on#<CR>
Write Blank Off <CR>*blank=off#<CR>
Read Blank Status <CR>*blank=?#<CR>
Write Menu On <CR>*menu=on#<CR>
Write Menu Off <CR>*menu=off#<CR>
Write Up <CR>*up#<CR>
Write Down <CR>*down#<CR>
Write Right <CR>*right#<CR>
Write Left <CR>*left#<CR>
Write Enter/OK <CR>*enter#<CR>
Write BACK <CR>*back#<CR>
Write Language + <CR>*lang=+#<CR>
Write Language - <CR>*lang=-#<CR>
Read Language Status <CR>*lang=?#<CR>
Write Auto Power off -disable <CR>*APOFF=DIS#<CR>
Write Auto Power off - 5 min <CR>*APOFF=5#<CR>
Write Auto Power off - 10 min <CR>*APOFF=10#<CR>
Write Auto Power off - 15 min <CR>*APOFF=15#<CR>
Write Auto Power off - 20 min <CR>*APOFF=20#<CR>
Write Auto Power off - 25 min <CR>*APOFF=25#<CR>
Write Auto Power off - 30 min <CR>*APOFF=30#<CR>
Read Auto Power off Status <CR>*APOFF=?#<CR>
Write AMX Device Discovery-on <CR>*amxdd=on#<CR>
Write AMX Device Discovery-off <CR>*amxdd=off#<CR>
Read AMX Device Discovery Status <CR>*amxdd=?#<CR>
Read Mac Address <CR>*macaddr=?#<CR>
Write High Altitude mode on <CR>*Highaltitude=on#<CR>
Write High Altitude mode off <CR>*Highaltitude=off#<CR>
Read High Altitude mode status <CR>*Highaltitude=?#<CR>
Write Key Lock on <CR>*keylock=on#<CR>
Write Key Lock off <CR>*keylock=off#<CR>
Read Key Lock status <CR>*keylock=?#<CR>
To Next Page
Loading...
Need help?
General
