18 Positioning your projector
Positioning your projector
Choosing a location
Before choosing an installation location for your projector, take the following factors into
consideration:
• Size and position of your screen
• Electrical outlet location
• Location and distance between the projector and the rest of your equipment
You can install your projector in the following ways.
After turning on the projector, go to INSTALLATION > Projector Mode and press / to select
a setting.
Obtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting, and the video format each
factors in the projected image size. To shift the lens, turn the knobs on the projector to shift the
1. Front
Select this location with the projector placed
on the table in front of the screen. This is the
most common way to position the projector for
quick setup and portability.
3. Rear Ceiling
Select this location with the projector
suspended upside-down from the ceiling
behind the screen. Note that a special rear
projection screen and a projector ceiling
mount kit are required for this installation
location.
2. Front Ceiling
Select this location with the projector
suspended upside-down from the ceiling in
front of the screen. Purchase a projector
ceiling mount kit from your dealer to mount
your projector on the ceiling.
4. Rear
Select this location with the projector placed
on the table behind the screen. Note that a
special rear projection screen is required.
To Next Page
Loading...
