48 Maintenance
Indicators
Light
Status & Description
Power events
Stand-by mode (The indicator lights may stay lit even after you
unplug the power cord. However, this is not a malfunction.)
Powering up
Normal operation
Normal power-down cooling
Phosphor/color wheel start fail
Phosphor/color wheel spin fail
Light source events
Light source error in normal operation
Light source is not lit up
Thermal events
Fan 1 error (the actual fan speed is outside the desired speed)
Fan 2 error (the actual fan speed is outside the desired speed)
Fan 3 error (the actual fan speed is outside the desired speed)
Fan 4 error (the actual fan speed is outside the desired speed)
Fan 5 error (the actual fan speed is outside the desired speed)
Fan 6 error (the actual fan speed is outside the desired speed)
Fan 7 error (the actual fan speed is outside the desired speed)
Fan 8 error (the actual fan speed is outside the desired speed)
Temperature 1 error (over limited temperature)
Temperature 2 error (over limited temperature)
Water pump error (The water from liquid cooler is insufficient)
: Off
: Orange On : Green On : Red On
: Orange Flashing : Green Flashing : Red Flashing
To Next Page
Loading...
