6 Important safety instructions
Water or other liquid, or foreign matter (metal, etc.) getting into the projector creates the
risk of fire and electric shock. Should anything get inside the projector, immediately
perform the following steps.
1. Turn off the projector.
2. Unplug the projector.
3. Contact your original dealer or authorized CASIO service center.
• Disassembly and modification
Never try to take the projector apart or modify it in any way. The projector contains a
large number of high-voltage components that create the risk of electric shock and burn
injury. Also, note that problems caused by unauthorized projector disassembly or
modification are not covered by the warranty and are not eligible for repair by CASIO.
Be sure to leave all internal inspection, adjustment, and repair up to your original dealer or
authorized CASIO service center.
• Dropping and impact
Continued use of the projector after it has been damaged by dropping or other
mistreatment creates the risk of fire and electric shock. Immediately perform the
following steps.
1. Turn off the projector.
2. Unplug the projector.
3. Contact your original dealer or authorized CASIO service center.
• Disposal by burning
Never try to dispose of the projector by burning it. Doing so can cause an explosion,
which creates the risk of fire and personal injury.
• Projector light emission
• Never look directly into the lens, intake vents, or exhaust vents while the light is on.
When turning on the projector, check to make sure that no one is looking directly into
its lens, intake vents, or exhaust vents. The strong light emitted by the projector
creates the risk of eye damage.
• Do not attempt to use a magnifying glass, mirror, or other similar object to bend or
reflect the projector’s light, and never hold or place such object in the path of the
projector’s light. Refracted or reflected light can shine into a person’s eyes and create
the risk of eye damage.
• Blocking the vents
Never allow the vents to become blocked. Doing so causes internal heat build up, which
creates the risk of fire and breakdown of the projector. Touching the projector while it is
hot creates the risk of burn injury. Make sure that you always observe the following
precautions.
To Next Page
Loading...
Need help?
General
