Casio XJ-UT310WN User Manual (English)

Other manuals for Casio XJ-UT310WN

User Guide101 pages

Brochure & Specs2 pages

Questions and Answers:

L
Lisa MaldonadoAug 22, 2025
What to do if I can establish a wireless LAN connection between my Casio XJ-UT310WN Projector and computer, but the computer screen contents won’t project?
- R
  robert32Aug 22, 2025
  If you can connect wirelessly but the screen isn't projecting, ensure that 'Network' is selected as the projector’s input source by pressing the [INPUT] key. If 'Network' is already selected, click (Project 1 screen) on the Network Connection window. Also, if the image has been frozen or blanked, press the [ESC] key on the remote to cancel the freeze/blank operation.
K
Kelly SchneiderSep 2, 2025
Why does Casio XJ-UT310WN Projector say folder does not contain any image files?
- N
  nphamSep 2, 2025
  If your Casio Projector indicates that a folder doesn't contain any image files, use your computer to check the contents of the folder. The File Viewer may not be able to access the folder or files within it.
R
Ryan MosesSep 1, 2025
Why question marks appear instead of thumbnails on Casio Projector?
- J
  Jose LambertSep 1, 2025
  If you see question marks instead of thumbnails in the Slide Mode file menu of your Casio Projector, it means the images can't be projected by the File Viewer.
C
christopher01Aug 30, 2025
Why Casio Projector doesn't show digital camera memory contents via USB?
- J
  Joe SmithAug 30, 2025
  If your Casio Projector isn't displaying the contents of your digital camera's memory when connected via USB, consult your digital camera's user documentation for information about the required settings and operations. It's possible the camera's USB mass storage class setting isn't configured correctly or that you need to perform a specific action on the camera. Also, your camera may not support USB mass storage class, and if it doesn't, you won't be able to view the contents.
M
Michael WeaverAug 29, 2025
What to do if Casio Projector doesn't recognize all devices connected via USB hub?
- A
  Alexis HouseAug 29, 2025
  If your Casio Projector isn't recognizing all connected devices via a USB hub or card reader, it's because the projector can only recognize up to four drives. Ensure that you connect no more than four memory devices at a time.
P
paigesavageAug 27, 2025
Why some folders and files are not displayed in the file menu of Casio Projector?
- W
  Wayne FrenchAug 27, 2025
  If your Casio Projector doesn't display all folders or files in the file menu, it might be because there are too many items in a single folder. If a folder contains more than 999 folders or files, the projector won't display all of them. To fix this, reduce the number of folders and files within that folder.
G
gordonharoldAug 26, 2025
How to fix Casio Projector when File Viewer does not appear after connecting USB?
- R
  Robin DavisAug 27, 2025
  If the File Viewer on your Casio Projector doesn't display a connected USB flash drive, the drive might be formatted in a way the projector can't recognize. Use your computer to check if the file system is FAT or FAT32. If it's not, reformat the USB flash drive to FAT or FAT32. Also, check the 'Plug and Play' setting under 'Option Settings 2' and make sure it's set to 'On'.
A
Alice GonzalezAug 25, 2025
What causes wireless LAN connection problems when multiple Casio projectors are used at the same time?
- C
  Cassandra JohnsonAug 25, 2025
  Wireless LAN connection problems with multiple projectors may occur if more than one projector is assigned the same SSID number. Check your settings to ensure each projector has a unique SSID.
W
Wayne WangAug 23, 2025
What to do if the network connection was lost while the Transfer File page was displayed on Casio Projector?
- L
  Linda HughesAug 23, 2025
  If the network connection was lost and the file list is blank, exit the web browser you are using to display the Transfer File page, and then log in to the Transfer File page over a wireless LAN connection or a wired LAN connection again.

Casio XJ-UT310WN Specifications

General

Matrix size	0.65 \
Matrix type	3-panel (p-Si TFT active)
Number of colors	16.78 million colors
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Supported aspect ratios	16:9, 16:10
Contrast ratio (typical)	1800:1
Screen size compatibility	50 - 110 \
Projector native resolution	WXGA (1280x800)
Keystone correction, horizontal	-5 - 5 °
Focus	Manual
Offset	118 %
Throw ratio	0.28:1
Focal length range	- mm
Light source type	Laser/LED hybrid
Service life of light source	20000 h
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, PAL 60, PAL M, PAL N, SECAM
Microphone in	Yes
Audio (L/R) in	2
USB connector type	USB Type-A, USB Type-B
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity	3
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Noise level	34 dB
Noise level (economic mode)	29 dB
RMS rated power	16 W
Placement	Desktop, Ceiling
Product type	Ultra short throw projector
Product color	Grey, White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.4 W
Power consumption (typical)	230 W
Operating altitude	0 - 3000 m
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %