CONTROL PANEL “PC210-ST”
DESCRIPTIONS
2) Button to check the car battery (B1) and the
leisure battery B2( ) and for the regulation of
the
USER’S
programmable parameters’ setting (see
SETTING).
1) On/off button (to turn on/off press for 2
seconds) at the start-up the display carries out a
functioning test and shows all symbols
(including unused symbols).
main
:
3) Button for the control of fresh water tank (in
%), for fresh water refilling function operation
(see FRESH WATER TANK REFILLING”
function) and for the regolation of the
programmable parameters’ setting (see
USER’S SETTING).
6) Function A) Button to switch the awning light
on and off (only after the button ref. 4 has
been activated)
Function B) Button to enter the set mode (see
USER’S SETTING).
NB: the temperature sensors are optional.
5) Button to switch the pump on and off.
4) Button to switch the lights and the heating/boiler
on and off
.
EN
15
4
1
5
6
2
3