CBE PC210-ST - Users Setting

EN
18
USER’S SETTING
s
To enter the set mode, press the “PROG” button
(ref.6) for more than 2 seconds from the main
screen.
s
Confirm the setting by pushing the “PROG” button
(ref. )6 , you then go automatically to next
parameter.
s
By using the arrow keys ref. 2 and 3 you can
modify the setting of the parameters.
BACKLIGHT COLOUR
Backlight colour selection.
s
Press 6 more than once
to save the settings and exit the setting mode.
the “PROG” button (ref. )
s
To exit without saving wait 20 seconds without
pressing any key.
LED BRIGHTNESS
- “L 2” (med)
- “L 1” (min)
LED brightness regulation:
- “L 3” (max)
ACOUSTIC ALARMS
- “t1” (activation)
Activation/Deactivation of acoustic alarms:
- “t0” (deactivation)