© 2024, CCV GmbH. All rights reserved. No parts of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form by any means, electronic, mechanical, photocopying, recording or otherwise, without the written
permission of CCV GmbH.
5.5 Cable connection inside host machine
CAUTION: In order to protect the device from water entry, the cables must be attached in such a
way, that liquids (i.e., condensation) cannot flow down the cable into the device:
The occurrence of condensation moisture can be limited by avoiding rapid temperature and humidity
condition changes or by avoiding direct flow of cold air onto the device.
To Next Page
Loading...
