What does a robot’s side brushes error mean on my Cecotec Vacuum Cleaner?
If you're getting a robot’s side brushes error on your Cecotec Vacuum Cleaner, check if the side brushes are blocked and, if so, clean them.
How to solve driving wheel error on Cecotec Vacuum Cleaner?
If you're getting a driving wheel error on your Cecotec Vacuum Cleaner, check if the driving wheel is blocked.
What to do if I get a low battery or charging error on my Cecotec Vacuum Cleaner?
If you're getting a low battery or charging error on your Cecotec Vacuum Cleaner, it means the robot has run out of battery. Manually place it on the charging base.
What does free-fall sensor error mean on Cecotec Vacuum Cleaner?
If you're getting a free-fall sensor error on your Cecotec Vacuum Cleaner, check if the bumper is dirty and clean the sensor.
How to fix bumper error on Cecotec Vacuum Cleaner?
If you're getting a bumper error on your Cecotec Vacuum Cleaner, check the bumper and remove any object that may be blocking it.
What does gyroscope error mean on Cecotec Vacuum Cleaner?
If you're getting a gyroscope error on your Cecotec Vacuum Cleaner, place the robot on a stable surface and restart it. Avoid moving it during this process.
Guidance on handling and potential hazards associated with the appliance's Li-ion battery.
Identifies key robot, charging base, and remote control components via figures and labels.
Explains indicator light statuses and functions of power/operation and back home buttons.
Details power adapter, dust tank, filters, mops, and magnetic strip parts.
Covers remote control display, charging indicators, and related components.
Covers unboxing, checking components, clearing the area, and placing the charging base.
Instructions for starting, pausing, resuming, and turning off the robot during operation.
How to command the robot to return to its charging base.
Details various cleaning modes including Auto, Intense Scrubbing, Spiral, and Edge.
How to activate and what to expect from the automatic cleaning function.
Instructions for using the vacuum, mop, and scrub functions with the mixed tank.
Guides for activating intense spot cleaning and edge cleaning functions.
Explains Room, Random, and Manual cleaning modes for specific cleaning tasks.
How to adjust suction power levels and scrubbing intensity.
Usage of magnetic strips for area delimitation and cleaning scheduling.
Step-by-step guide to setting the current time on the remote control.
How to schedule cleaning cycles and manage settings via the remote control.
Procedure to cancel pre-programmed cleaning sessions.
Instructions for emptying the dust tank and cleaning the robot's filters.
Procedures for cleaning free-fall sensors and the main brush.
Guidance on cleaning and replacing the high-efficiency filter.
Details on mesh primary and sponge filters, including cleaning and replacement recommendations.
Guidance on cleaning side brushes, the main brush, and robot sensors.
Lists error codes indicated by oscillating red light and their corresponding solutions.
Lists error codes indicated by steady red light and their corresponding solutions.
Addresses issues like robot not turning on, remote control failure, and charging problems.
Solutions for low suction, brush issues, and unusual robot movements or routes.
General| Battery Capacity | 2600 mAh |
|---|---|
| Charging Time | 4 hours |
| Noise Level | 64 dB |
| Connectivity | Wi-Fi |
| Mop Function | Yes |
| Water Tank Capacity | 270 ml |
| Battery Type | Lithium-Ion |
| App Control | Yes |
| Voice Control | Yes |
| Programmable | Yes |
| Filter Type | High-Efficiency Filter |
| Suction Power | 2100 Pa |
| Runtime | 160 minutes |
| Control | App, Remote control |
| Operating Modes | Auto, Edge, Manual, Spiral |
| Suitable for | Hard Floors, Carpets |
To Next Page