Sect. 3 - Installation and Operator’s Controls of the Bench Saw
•
CEDIMA
®
• Technical Documentation • All rights reserved as per DIN 34 • „Subject to modifications due to progressive development“ •
Page 21
Bench Saw CTS•81, L, XL
Operating Manual 70 9998 0329 / UK 003
3.9 Guide rail limit stop
The guide rail is equipped with a limit stop deter-
mining the end-position of the swivel-joint cut-
ting head (fig. 3.20). This limit stop prevents the
saw blade from cutting into the edge of the Bench
Saw.
Fig. 3.20 Guide rail limit stop
3.10 Bench Saw accessories
3.10.1 Optional angle stop for angled cuts
Fig. 3.21 Adjustable angle stop for angled cuts
An adjustable angle stop (order no. 40 009 001
00, fig. 3.21) for making any desired angled cuts
is available as an optional accessory. This angle
stop is mounted on the stop rail and fixed using a
star grip.
To Next Page
Loading...