Sect. 8 - Terms of Warranty
•
CEDIMA
®
• Technical Documentation • All rights reserved as per DIN 34 • „Subject to modifications due to progressive development“ •
Page 29
Bench Saw CTS•81, L, XL
Operating Manual 70 9998 0329 / UK 003
8. Terms of Warranty
1. Complaints must be submitted without delay,
however, within 14 days following the arri-
val of the device at the latest. If this deadline
has expired, or if the device complained
about is put into operation and used for work,
then the device complained about shall be
considered accepted and therefore free of
faults. Hidden defects must be reported in
writing immediately after being discovered,
however at the latest within 6 months of the
receipt of the device.
2. We guarantee the agreed usability of the de-
vice delivered by us for a period of 12 mont-
hs, the term beginning on the day the device
arrives with the buyer. Irrespective of this,
our obligation shall be considered as fulfil-
led, as soon as the goods are despatched from
our works/warehouse. In no case do we assu-
me a producer´s guarantee. The mandatory
regulations of the law for product liability
remain untouched.
3. Wearing parts are subject to a limited war-
ranty. Wearing parts are parts subject to ope-
ration-related wear during proper use of the
device. The rate of wear cannot be uniformly
defined and differs according to the intensity
of use. The wearing parts must be adjusted,
maintained and, if necessary, replaced for the
specific device in accordance with the manu-
facturer´s operating manual. Operation-rela-
ted wear is not a reason for claims to defects.
Wearing parts for the construction devices such
as core drilling and sawing machines and special
machinery as well as related general assemblies
(if available):
• Feed and drive elements such as toothed racks,
gearwheels, pinions, spindles, spindle nuts,
spindle bearings, wires, chains, sprockets, belts
• Seals, cables, hoses, packings, gaskets, plugs,
couplings and switches for pneumatic, hydrau-
lic, water, electricity, fuel systems
• Guide elements such as guide strips, guide bus-
hes, guide rails, rollers,
• bearings, sliding protection supports
• Clamping elements for quick-release systems
• Flushing head seals
• Slide and roller bearings that do not run in an
oil bath
• Shaft oil seals and sealing elements
• Friction and safety clutches, braking devices
• Carbon brushes, collectors / armatures
• Consumable operating materials such as fuels,
lubricants, coolants etc.
• Easy-release rings
• Control potentiometers and manual switching
elements
• Securing elements such as dowels, anchors,
screws and bolts
• Fuses and lamps
• Bowden cables
• Commutators
• Diaphragms
• Spark plugs, glow plugs
• Parts of the reversing starter such as the starting
rope, starting pawl, starting roller and return
spring
• Sealing brushes, rubber seals, splash protection
cloths
• Filters of all kinds
• Drive and guide wheels/pulleys and associated
rubber tyres
• Cable wire protection elements
• Drive and travel wheels
• Water pumps
• Cut-material transport rollers
• Drilling, separating and cutting tools
• Energy storage devices.
4. In case of a justified complaint, we can choo-
se to repair the device and/or to provide a re-
placement against return of the device. Re-
placed parts or devices become our property.
5. A complaint has to be filed in writing, stating
machine number, invoice number and date.
6. Improvements shall always be carried out at
the delivery plant. Repair work requested by
the buyer to be carried out on his or a third
party´s premises, needs prior consent by us.
The resulting costs of the mechanic and any
Page 1 of 2 Pages
To Next Page
Loading...