Page 8 •
CEDIMA
®
• Technical Documentation • All rights reserved as per DIN 34 • „Subject to modifications due to progressive development“ •
Sect. 1 - General Product Information
Bench Saw CTS•81, L, XL
Operating Manual 70 9998 0329 / UK 003
• Stripper brushes mounted inside the blade
guard ensure that the water is properly distribu-
ted over the entire saw blade face.
• Powerful blade drive (2.2 kW, 230 V / 50 Hz).
• The saw is designed to support mitre cuts up to
45 degrees.
• The plug-in feet, hinged guide rail and work ta-
ble can be disassembled, thereby allowing the
saw to be transported easily to other storeys or
onto scaffolds.
• Carrying handles mounted on all four corners
make it easy to quickly relocate the entire saw
when mounted completely.
The Bench Saw is available in the versions
CTS•81, CTS•81 L and CTS•81 XL for different
cutting lengths (850 mm, 1250 mm and
1640 mm, respectively). Figure 1.2 illustrates the
CTS•81 XL for cutting lengths up to 1640 mm.
Fig. 1.2 Bench Saw CTS•81 XL for cutting lengths up to 1640 mm
To Next Page
Loading...