CEM SMART System 5 - Page 73

66
22. Place an empty container suitable for the
sample and diluent on the external balance.
Wait for the weight to stabilize.
23. Press TARE.
24. Wait for the SMART System
5
to tare the
weight of the container.
25. Place the sample in the container on the
external balance pan.
26. Wait for the weight to stabilize.
27. Press READY.
Note: Press the operation key below ABORT to
end the dilution analysis.
The instrument reads and records the weight of
the sample.
Dilution (Ext)
Place empty container on
external balance and press TARE.
ABORT
TARING BALANCE . . .
Dilution (Ext)
Add sample to container
and press READY.
ABORT
READING BALANCE . . .