CEM SMART System 5 - Page 87

80
21. Wait for the instrument to tare the weight
of the sample pads.
22. Ensure that the balance pan of the external
balance is free of any weight. Press TARE
on the SMART System
5
.
23. Wait for the system to tare the external
balance.
24. Place the syringe filled with sample on the
external balance pan.
25. Press READY.
Note: Press the operation key below ABORT to
end the analysis.
TARING BALANCE . . .
Syringe Weigh (Ext)
Clear external balance
pan and press TARE.
ABORT
TARING BALANCE . . .
Syringe Weigh (Ext)
Place filled syringe on external
balance and press READY.
ABORT