I 1437 - 02/19 - Ver. 01
Use and maintenance manual
EN
ENGLISH
General Index
1. FOREWORD 3
1.1 GENERAL 3
1.2 PURPOSE OF THE MANUAL 3
1.3 WHERE AND HOW TO KEEP THE MANUAL 4
1.4 MANUAL UPGRADES 4
1.5 COLLABORATION WITH USERS 4
1.6 MANUFACTURER 4
1.7 MANUFACTURER’S RESPONSIBILITY AND WARRANTY 4
1.7.1 Terms of warranty 5
1.8 TECHNICAL ASSISTANCE SERVICE 5
1.9 COPYRIGHT 5
2. MACHINE DESCRIPTION 6
2.1 TECHNICAL SPECIFICATIONS 6
2.2 DIMENSIONS 6
2.3 COMPONENTS 6
3. STARTING 8
4. CORRECTION PLANE IDENTIFICATION 10
5. CONTROL PANEL 11
6. USE OF THE WHEEL BALANCER 12
6.1 STANDARD BALANCING (CLIP-ON COUNTERWEIGHTS) 12
6.1.1 Wheel dimensions setting 12
6.1.2 Result of the measurement and weight application 14
6.2 BALANCING WITH ADHESIVE WEIGHTS (ALU) 15
6.2.1 Wheel dimensions setting 15
6.2.2 Result of the measurement and weight application 16
6.3 BALANCING WITH A MIX OF ADHESIVE AND CLIP-ON WEIGHTS AND STATIC BALANCING 17
6.4 STATIC UNBALANCE 18
6.5 EXACT POSITIONING OF THE ADHESIVE WEIGHT BY MEANS OF THE GAUGE WITH CLIPS 18
6.6 HIDE THE ADHESIVE WEIGHTS (SPLIT) 19
6.7 AUTOMATIC MINIMIZATION OF STATIC UNBALANCE 19
6.8 AUTOADAPTIVE CORRECTION METHOD 19
6.9 UNBALANCE OPTIMIZATION 20
7. SETUP 21
7.1 MENU ACCESS DIAGRAM 21
7.2 SELF-DIAGNOSTICS 22
7.3 BALANCING MACHINE CALIBRATION 22
7.4 AUTOMATIC GAUGES CALIBRATION 23
7.4.1 Distance gauge calibration 23
7.4.2 Diameter gauge calibration E 24
To Next Page
Loading...
Need help?
General
