CENTURION SYSTEMS D20 SMART - Height Adjustment

page 33 www.centsys.com
The D10 SMART / D10 Turbo SMART / D20 SMART's unique Height Adjustment
System adjusts from the top of the gearbox. This adds further security to the system, as
it is not possible to access the Height Adjustment Bolts from the outside of the gearbox.
7.8. Height Adjustment
FIGURE 41
FIGURE 42
BB
BB
Section View B-B
Foundation Plate
Height
Adjustment
Bolt
Using a spirit level, ensure that the Operator is level. If not, use the four Height
Adjustment Bolts to level the Operator.
Using a ratchet and a 12mm socket, turn the Height Adjustment Bolt clockwise to lift the
Operator, or turn it anti-clockwise, to lower the Operator.
Spirit Level
Control Card
Platfrom
Gearbox
Height Adjustment
Bolt
Foundation
Plate
OPERATOR INSTALLATIONSECTION 7
Lubricating the Height Adjustment Bolts with Q20 or a similar general purpose
lubricant will make adjusting the bolts easier.