CENTURION SYSTEMS D5 SMART

Need help?

Do you have a question about the CENTURION SYSTEMS D5 SMART and is the answer not in the manual?

Summary

Introduction

Important Safety Information

Crucial safety guidelines for users and installers to prevent harm and ensure correct operation.

Specifications

New Site Installation Preparation

Endstops

Guide-rollers and Anti-lift Brackets

Starting and Running Forces

Cabling Requirements

Operator Installation

New Site Installations

Step-by-step guide for installing the D5 SMART operator on new sites.

Retro-fit Installations (Existing Sites)

Preparing the D5 SMART for Installation

Steps to prepare the D5 SMART unit before mounting, including component removal.

Mounting the Gearbox

Procedure for mounting the gearbox assembly using height adjusters for new and retro-fit installations.

Routing the Cables

Manual Override

How to disengage, latch, and re-engage the manual release mechanism for gate operation.

Height Adjustment

Mounting the Rack

Attaching the gate rack to the pinion and gate, ensuring correct gap and alignment.

Re-assembling the D5 SMART

Completing the Installation

Fitting the Batteries

Instructions for installing the main batteries into the operator unit.

Wiring the Control Card on its Default Settings

Commissioning the System

Steps to set up and configure the D5 SMART system using the smartphone application.

General Maintenance

Installation Handover

Warranty Information