CENTURION SYSTEMS D5 SMART - 4 Required Tools and Equipment

page 12 www.centsys.com
REQUIRED TOOLS AND EQUIPMENTSECTION 4
4. Required Tools and Equipment
FIGURE 3. REQUIRED TOOLS AND EQUIPMENT
Ratchet and
Socket set
(17mm and 19mm)
with extensions
Crimping tool
and Pin lugs
Masonry drill bits
Connector
block
Angle grinder
Pin punch
6mm
Hacksaw
Spirit level
Marking
pen/chalk
Extension cord
Soldering
iron
Safety equipment
(goggles, gloves, etc.)
Welding machine
(including consumables)
and safety equipment
Measuring
tape
G-clamps
(x2)
Electric Drill
Screwdrivers
6mm Phillips
3.5mm Flat
Hammer
Smartphone
with app
installed
Pliers