Name: Cessna Skylane 182T
Brand: Cessna
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SECTION

NORMAL PROCEDURES

CESSNA

MODEL 182T NAV

Ill

CRUISE

(Continued)

FUEL SAVINGS PROCEDURES FOR NORMAL OPERATIONS

For best fuel economy during normal operations, the following

procedures are recommended.

1. After engine start and for all ground operations, set the

throttle to 1200 RPM and lean the mixture for maximum

RPM. After leaning, set the throttle to the appropriate RPM

for ground operations. Leave the mixture at this setting until

beginning the BEFORE TAKEOFF checklist. After the

BEFORE TAKEOFF checklist is complete re-lean the

mixture as described above until ready for TAKEOFF

checklist.

(

2. Lean the mixture for placarded fuel flows during maximum

continuous power climbs.

Lean the mixture at any altitude for RECOMMENDED LEAN

or BEST ECONOMY fuel flows when using

80% or less

power.

NOTE

Using the above recommended procedures can

provide fuel savings in excess of

5% when

compared to typical training operations at full rich

mixture. In addition, the above procedures will

minimize spark plug fouling since the reduction in

fuel consumption results in a proportional reduction

in tetraethyl lead passing through the engine.

(Continued Next Page)

Other manuals for Cessna Skylane 182T

Questions and Answers:

Need help?

Do you have a question about the Cessna Skylane 182T and is the answer not in the manual?

General