SECTION 8 CESSNA
HANDLING, SERVICE AND
MAlNTElVAlVCE MODEL 182T NAV Ill
IDENTIFICATION PLATE
All correspondence regarding your airplane should include the
Serial Number. The Serial Number, Model Number, Production
Certificate Number (PC) and Type Certificate
NumbW(TC) can be
found on the ldentification Plate, located on the aft left tailcone. A
secondary ldentification Plate is also installed on the lower part of
the left forward doorpost. Located adjacent to the secondary
ldentification Plate is the Finish and Trim Plate which contains a
code describing the exterior paint combination of the airplane. The
code may be used in conjunction with an applicable Illustrated Parts
Catalog if finish and trim information is needed.
CESSNA OWNER ADVISORIES
Cessna Owner Advisories are sent to Cessna Aircraft FAA
Registered owners of record at no charge to inform them about
mandatory
and/or beneficial aircraft service requirements and
product changes. Copies of the actual bulletins are available from
Cessna Service Stations and Cessna Customer Service.
UNITED STATES AIRPLANE OWNERS
If your airplane is registered in the U. S., appropriate Cessna Owner
Advisories will be mailed to you automatically according to the latest
aircraft registration name and address which you have provided to
the FAA. Therefore, it is important that you provide correct and up-
to-date mailing information to the FAA.
If you require a duplicate Owner Advisory to be sent to an address
different from the FAA aircraft registration address, please complete
and return an Owner Advisory Application (otherwise no action is
required on your part).
INTERNATIONAL AIRPLANE OWNERS
To receive Cessna Owner Advisories, please complete and reiurn
an Owner Advisory Application.
Receipt of a valid Owner Advisory Application will establish your
Cessna Owner Advisory service for one year, after which you will be
sent a renewal notice. It is important that you respond promptly to
update your address for this critical service.
8-4 U.S. 182TPHAUS-00