CH C1 - Page 30

[LP] Long Push Any state As in Normal mode
[C>>] Central Rotate Right Shortcuts (except last)
Last Shortcut (SETUP)
Modify parameter up (when available)
Enter Menu mode
[<<C] Central Rotate Left Shortcuts Modify parameter down (when available)
[E>>] External Rotate Right Shortcuts (except last)
Last Shortcut (SETUP)
Modify parameter up (when available)
Enter Menu mode
[<<E] External Rotate Left Shortcuts Modify parameter down (when available)
User control knob actions for Shortcuts
The PHASE POLARITY Shortcut gives a good illustration of how to navigate a Shortcut screen. Navigating other Shortcuts is similar.
PHASE POLARITY Shortcut display elements
(1) Shortcut title (Parameter, for other Shortcuts, title changes accordingly)
(2) Arrow indicating External Rotate Right [E>>] if applies. The item below indicates the next parameter value (up direction)
(3) Next Parameter Value if External Rotate Right [E>>] is applied (parameter up)
(4) Current Parameter Value (for other Shortcuts the current Value of the Parameter is displayed on this line)
(5) Next parameter value if External Rotate Left [<<E] is applied (parameter down)
(6) Arrow indicating External Rotate Left [<<E] if applies. The item below indicates the next parameter value (down direction)
The last Shortcut (SETUP) is always the same and cannot be removed or altered. It gives access the Menu mode to access the
detailed setup of the unit.
30 C1 User Manual Rev 1.9
PHASE POLARITY INVERSION
IN PHASE
OUT OF PHASE
(1)
(3)
(4)
(5)
(2)
...
CA
(6)