CH C1 - Returning to Factory Defaults

C1 connection to home network
In such case:
• C1 clock source (for this input): INTERNAL
4.6 Returning to Factory defaults
The unit can be reset to Factory default settings by using the RESET ALL SETTING item of the FACTORY SETTING menu. For a list of
Factory default settings, please refer to the Specifications section.
50 C1 User Manual Rev 1.9
Computer with LAN capability (e.g. NAS server)
C1 D/A Controller, 1x DIGITAL_IN + 1x Ethernet NETWORK board
Ethernet RJ45 cable
Audio Clock
Ethernet RJ45 cable
AudioClock
Router
Wifi
Tablet