SETUP Shortcut display elements
(1) Shortcut title. It indicates that Detailed Setup (Menu mode) can be entered at this stage
(2) Current value of the parameter. Default action is to exit (go back to Normal mode)
(3) Arrow indicating External Rotate Right [E>>] (or Central Rotate Right [C>>])
(4) Next parameter value. If External Rotate Right [E>>] is applied, the unit enters into Menu mode
4.2.3 Menu mode
The Menu mode allows for Configuration and Setup of the C1 D/A controller through a set of menus. Menu mode is entered from
the last Shortcut item (see above). From Normal mode, enter the Shortcut mode by applying a Normal Push [NP]. By successive
Normal Pushes [NP], step to the last Shortcut item (DETAILED SETUP) and apply an External Rotate Right [E>>] to enter the Menu
mode.
Navigation in Menu mode is based on Central Rotate Left/Right [<<C]/[C>>] to select a given menu item and External Rotate
Left/Right [<<E]/[E>>] to change menu level.
User Control Knob Action Unit Action
[NP] Normal Push Enter next menu level or Validate choice (save setting)
[LP] Long Push Puts the unit into Standby
[C>>] Center Rotate Right Move to next menu item downward
[<<C] Center Rotate Left Move to next menu item upward
[E>>] External Rotate Right Enter next menu level
[<<E] External Rotate Left Return to previous menu level without saving
User control knob actions in Menu mode
Rev 1.9 C1 User Manual 31
To Next Page
Loading...