4.3.1.2 DISPLAY SETTING
The C1 SETUP >> DISPLAY SETTING menu allows configuration of the display
related Parameters of the unit. Accessible Parameters are:
- DISPLAY TYPE:
- LED ON/OFF:
- BRIGHTNESS PCM:
- COLOR PCM:
- BRIGHTNESS DSD:
- COLOR DSD:
- BRIGHTNESS ANALOG:
- COLOR ANALOG:
- INPUT RENAMING:
Allows to chose what to display
Selects if the LED is turned on when the display is off
Sets the display brightness for PCM playback
Selects the display color for PCM playback
Sets the display brightness for DSD playback
Selects the display color for DSD playback
Sets the display brightness for analog source playback
Selects the display color for analog source playback
To customize the name of any input
The following table details the Parameters of the DISPLAY SETTING menu:
PARAMETER PARAMETER VALUES REQUIRED OPTIONS REMARKS
DISPLAY TYPE Input
Off
Volume
None Allows to chose what to display by default: The input
name, nothing, or the C1's volume
LED ON/OFF On
Off
None If the display is turned off, setting the LED ON/OFF
Parameter to On will make sure the LED in the logo
remains lit during operation.
If the LED ON/OFF Parameter is set to Off, the LED
will turn off during operation whatever the value of
the DISPLAY ON/OFF parameter.
BRIGHTNESS PCM 10%
20%
30%
...
90%
100%
None Sets the display brightness when a PCM audio
stream is played.
The C1 supports three different display settings
(BRIGHTNESS and COLOR parameters). One used
during PCM playback, one used during DSD
playback and one used when playing an analog
source
COLOR PCM
Predefined colors
Custom color
Edit custom color
None Selects the display color for PCM playback
Predefined colors
represents a set of factory defined
colors
Custom color is a user definable color. To Edit the
custom color select the Edit custom color Value. Sub-
menus allow to individually configure Red, Green
and Blue components (RGB) of the custom color.
38 C1 User Manual Rev 1.9
To Next Page
Loading...