7.3 Factory settings
Following table lists the factory settings of your C1 D/A Controller:
SETTING Value
AUDIO SETTING
MUTE Unmuted
PHASE POLARITY In phase
CLOCK SOURCE CH-LINK: Audio In
AES-EBU: Audio In
COAXIAL: Audio In
OPTICAL: Audio In
USB: Internal
STREAMING: Internal
XLR (analog): Internal
RCA (analog): Internal
INPUT TYPE All available inputs: normal
INPUT GAIN 0 dB on all inputs
BALANCE Centered
MONO MODE Stereo
PCM FILTER TYPE Minimum phase
DSD FILTER TYPE Minimum phase
C1 TYPE D/A Controller (volume control enabled)
MAX START VOL -50 dB
MAX VOLUME 0dB
USB AUDIO CLASS 2.0 (up to 192 kHz)
USB AUDIO POWER Keep USB powered
PHONO CURVE RIAA
DISPLAY SETTING
DISPLAY TYPE Input
LED ON/OFF Off
BRIGHTENESS PCM 80%
COLOR PCM Blue
CUSTOM COLOR PCM VFD like
BRIGHTENESS DSD 80%
COLOR DSD Blue
Rev 1.9 C1 User Manual 59
To Next Page
Loading...