CH C1 - Page 39

BRIGHTNESS DSD 10%
20%
30%
...
90%
100%
None Sets the display brightness when a DSD audio
stream is played.
The C1 supports three different display settings
(BRIGHTNESS and COLOR parameters). One used
during PCM playback, one used during DSD
playback and one used when playing an analog
source
COLOR DSD Predefined colors
Custom color
Edit custom color
None Selects the display color for DSD playback
Predefined colors represents a set of factory defined
colors
Custom color is a user definable color. To Edit the
custom color select the Edit custom color Value. Sub-
menus allow to individually configure Red, Green
and Blue components (RGB) of the custom color.
BRIGHTNESS ANALOG 10%
20%
30%
...
90%
100%
ANALOG_IN or
PHONO_IN
Sets the display brightness when an analog input is
played back
The C1 supports three different display settings
(BRIGHTNESS and COLOR parameters). One used
during PCM playback, one used during DSD
playback and one used when playing an analog
source
COLOR ANALOG Predefined colors
Custom color
Edit custom color
ANALOG_IN or
PHONO_IN
Selects the display color for analog input playback
Predefined colors represents a set of factory defined
colors
Custom color is a user definable color. To Edit the
custom color select the Edit custom color Value. Sub-
menus allow to individually configure Red, Green
and Blue components (RGB) of the custom color.
INPUT RENAMING Any string None Used to rename any input in the C1
Details of DISPLAY SETTING menu Parameters
Rev 1.9 C1 User Manual 39