(1) Menu title. C1 SETUP >> AUDIO SETTING shows that the parent menu is C1 SETUP. By applying External Rotate Left [<<E], the unit returns to the
parent menu.
(2) A Parameter Value of '...' indicates that the menu items gives access to one or more further sub-menu(s). Further sub-menus have the same
structure as this example.
(3) This is the Parameter Value column. For each item in the Parameter column, the Parameter Value item on the same line indicates the current
value of the Parameter.
(4) This is the Parameter column. The currently active Parameter is highlighted. Use Central Rotate Left/Right [<<C]/[C>>] to navigate from
Parameter to Parameter.
(5) If the first or last item in the Parameter column is indicated by '...' it means that there are additional Parameters not displayed currently on-
screen. Use Central Rotate Left/Right [<<C]/[C>>] to navigate towards the '...' to make the corresponding Parameters appear on screen.
Once a terminal Parameter (e.g. a Parameter not giving access to a further sub-menu) is selected by External Rotate Right [E>>],
the C1 displays the corresponding Parameter adjustment screen. Following example shows the AUDIO SETTING >> PHASE
POLARITY Parameter adjustment screen. Other Parameters are similar but may show more (or less) choices for Parameter value.
Once a Parameter is set to the desired value, a Normal Push [NP] saves the new Parameter Value and gets back to the parent level
(save and exit). On the other hand, an External Rotate Left [<<E] gets back to the parent menu (in the case of this example:
AUDIO SETTING), but possible modifications of the Parameter Value are discarded (exit without saving).
AUDIO SETTING >> PHASE POLARITY menu display elements
(1) Menu title. AUDIO SETTING >> PHASE POLARITY shows that the parent menu is AUDIO SETTING. To access the parent menu, use External Rotate
Left [<<E]
(2) The current Parameter Value is highlighted. Use Central Rotate Left/Right [<<C]/[C>>] to navigate through Parameter Values
(3) Other possible Parameter Value(s). Number of other Parameter Value(s) depends on Parameter
(4) Parameter for which the Parameter Value can be modified in the current menu.
The following section gives detailed information about the menu structure and the various Parameters. Note that certain Parameter
may or may not appear in the menu depending on installed options. For instance if no ANALOG_IN board is installed, menu items
related to the RCA and XLR inputs (enable, gain, renaming) do not appear in the menu.
Rev 1.9 C1 User Manual 33
To Next Page
Loading...