records. it. In this case, use a subsonic filter of decrease the gain of the phono stage.
Lost in the settings? Restore factory setting and start your setup again
Firmware update fails Try Emergency Software Update procedure
If it fails, download the latest C1 firmware from www.ch-precision.com, prepare a software
update image on a FAT32 formatted USB stick and run the Emergency Software Update
procedure again
USB flash drive for firmware
update is not detected by C1
Please try another brand of USB flash drive (e.g. Sandisk).
Troubleshooting
If the error cannot be corrected using the information from the above table, disconnect the unit from AC wall power and from the
rest of you system and contact your authorized dealer.
Rev 1.9 C1 User Manual 55
To Next Page
Loading...