Frequency response (-3dB point) DC-120kHz (balanced and unbalanced, digital filter dependent)
Dynamic Range (DNR) 120dB (balanced and unbalanced)
Signal to Noise Ratio (SNR) 123dB (balanced and unbalanced)
Total Harmonic Distortion + Noise (THD+N) <0.0015% (balanced and unbalanced)
Digital Audio inputs (DIGITAL_IN board, four stereo inputs per board)
CH LINK Proprietary high-definition link supporting high-definition uncompressed
audio and control. Cyphered operation for high resolution signals (DSD).
LVDS signaling for all I
2
S audio signals (incl. clocks).
PCM 16-32 bits / 44.1-768 kHz; DSD 2.8224 or 5.6448 MHz
AES-EBU (consumer format) XLR connector, 0.5-5Vpp diff., 110'Ohm
PCM 16-24 bits / 44.1-192 kHz
Coaxial (S/PDIF) RCA connector, 0.1-1Vpp, 75'Ohm
PCM 16-24 bits / 44.1-192 kHz
Optical TOSLINK (S/PDIF) Standard TOSLINK optical connector
PCM 16-24 bits / 44.1-192 kHz
USB Audio inputs (USB_IN board, one connector per board)
USB Audio Class 1.0 (A-type plug) Asynchronous playback (C1 master, computer slave)
PCM 16-24 bits / 44.1-96 kHz
USB Audio Class 2.0 (A-type plug) Asynchronous playback (C1 master, computer slave)
PCM 16-24 bits / 44.1,-192 kHz
Ethernet Streaming Audio inputs (NETWORK board)
Audio file types WAV, AIFF, FLAC, ALAC, MP3, AAC
Audio formats Stereo PCM 16-24 bits / 44.1-192 kHz
Stereo DSD 1bit / 2.8224 or 5.6448 MHz
Analog Audio inputs (ANALOG_IN board, two stereo inputs per board)
Balanced input pair True balanced XLR connectors
Single-ended input pair RCA connectors
Maximum input level 4Vrms (balanced)
2Vrms (single-ended)
A/D conversion stage 24 bits / 192 kHz
Synchronization inputs and output (SYNC_IO board)
Clock input 1x BNC connector, 0.5Vpp to 5Vpp, 75'Ohm or high input impedance
Wordclock (44.1, 48, 88.2, 96, 176.4, 192 kHz),
Masterclock (22.5792, 24.476 MHz),
DSD bitclock (2.8224 MHz),
Atomic clock (100 kHz, 10 MHz),
40% to 60% duty cycle square wave
Rev 1.9 C1 User Manual 57
To Next Page
Loading...