Chamberlain 8360 - Erasing Remote Memory

33
To Erase the Memory
ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES
1 Press and hold the learn button on garage door opener until the learn LED goesout
(approximately6 seconds). All remote control and keyless entrycodes are nowerased.
Reprogram anyaccessory you wish to use.
ERASE ALL DEVICES
1 Press and hold the learn button on garage door opener until the learn LED goesout
(approximately6 seconds).
2 Immediatelypress and hold the learn button again until the learn LED goes out. All codes are
now erased.
Reprogram anyaccessory you wish to use.
Remote Controls