To Next PageTo Next Page
Need help?Do you have a question about the Chamberlain 8360 and is the answer not in the manual?
General| Type | Garage Door Opener |
|---|---|
| Horsepower | 1/2 HP |
| Smart Technology | MyQ Technology |
| Noise Level | Moderate |
| Motor | DC motor |
| Voltage | 120V |
| Frequency | 60 Hz |
| Battery Backup | Yes |
| Security | Rolling code technology |
| Connectivity | Wi-Fi |
| Speed | 7 inches per second |
| Drive System | Chain |
| Safety Features | Safety sensors |
| Warranty | Lifetime motor warranty |
| Smart Home Compatibility | Yes |
| Remote Control | Yes |
| Drive | Chain Drive |
Explains the meaning of safety symbols and signal words used in the manual.
Instructions on how to check the garage door for balance, binding, and proper seal.
Lists and illustrates the components included in the garage door opener package.
Crucial safety warnings and guidelines to follow before and during installation.
Instructions for determining location and securely installing the header bracket.
Steps for attaching the rail, positioning, and hanging the garage door opener unit.
Instructions for installing the door bracket, connecting the door arm to the trolley.
Steps for installing light bulbs and the emergency release rope and handle.
Instructions for mounting the wall-mounted door control unit.
Steps for connecting the wires from the door control to the garage door opener unit.
Instructions for affixing entrapment warning and safety test labels to the garage.
Overview of the safety reversing sensors and their importance for safe operation.
Details two options (door track or wall) for mounting the safety reversing sensors.
Details the third option (floor) for mounting the safety reversing sensors.
Instructions for wiring the safety sensors if the garage is not pre-wired.
Instructions for connecting safety sensors in a garage with pre-installed wiring.
Provides two options for connecting power: typical (plug-in) or permanent wiring.
Checks the alignment of safety sensors by verifying LED status and troubleshooting.
Verifies the correct wiring of the door control by checking the command LED.
Explains the purpose of electronic controls for setting door travel limits and force.
Step-by-step guide to program the desired open and close positions for the garage door.
Instructions for testing the safety reversal system and safety reversing sensors.
Steps for installing and testing the backup battery system.
Explains LED indicators, charging, and battery life information.
A list of critical warnings and instructions for safe operation of the garage door opener.
Explains the automatic door closing feature and its activation.
Describes MyQ™™ technology for remote monitoring and control.
Details compatibility with various remote and door control accessories.
Explains the function and importance of safety reversing sensors.
Describes the sleep mode feature for energy efficiency.
Information on the opener's lighting feature and compatible bulb types.
How to operate the opener using different control methods.
Steps to synchronize the door control with the garage door opener.
How to use the push bar for opening and closing the door.
How to operate the garage door opener lights and automatic light feature.
Details the Timer-to-Close feature, its activation, and limitations.
Explains the lock feature for preventing remote activation.
Explains automatic light activation via motion sensing.
Describes the maintenance alert system and its indicators.
Steps to program remotes or keyless entry using door control or opener.
Instructions for erasing all programmed remote controls and keyless entries.
Steps to disengage and re-engage the trolley for manual door operation.
Details monthly, annual, and periodic maintenance tasks.
Warnings and instructions for replacing the battery in the remote control.
Lists diagnostic codes, symptoms, causes, and resolutions for opener issues.
Addresses common problems not covered by diagnostic codes, like beeping or remote issues.
Lists and illustrates parts related to the opener's rail assembly.
Lists and illustrates various parts used during the installation process.
Lists and illustrates internal components of the opener unit.
Provides contact details for ordering parts and seeking service.
MyQ Gateway, Garage Door Monitor, Surge Protector.
Various remote controls, mini remotes, and keyless entry devices.
Smart Control Panels, Door Controls, Light Switches, Wireless Controls.
Details the one-year limited warranty for the product and lifetime for the motor.
Specifies the one-year warranty for the battery backup unit.
