11
STANDARD INSTALLATION LAYOUT
Top View of Closed Gate
Top View of in Open Position
1/4
Bracket Position
Long arm
is on TOP
of
bracket.
Mount bracket at least a quarter of the gate length from the gate hinge.
Gate Hinge
Important Note:
Compact
Installation
1/41/4
Bracket Length
Arm must be 90° from Gate
Bracket Length
Gate Open 90°
Helpful Layout Note:
A)TOP
B)
C)
D)
E)
DO NOT
1-800-528-2806
NOTE: Longer gates or retro-fits may require both arms to be lengthened by equal parts.
8" Minimum to avoid
scissoring of arms
9" Minimum
for Gate
Clearance
To Next Page
Loading...
