Chamberlain CSW200UL - Built-In Reset Switch; Audio Alarm

35
OFF
ON
BUILT-IN RESET SWITCH
AUDIO ALARM



If the audio alarm goes off, always check the gate area for:
 • Obstructionsinthegatepath.
 • Damagetothegateand/orgateoperator.
















Press the built-in reset switch to shut off alarm and reset operator (see above).
Incorrect
Incorrect
Pressing the reset switch will stop a moving gate during a
normal open/close cycle, like a stop button. The operator
does NOT need to be reset after doing this.
twice consecutively,
 5 minutes or until the reset switch is pressed!