EasyManua.ls Logo

Chamberlain LA100 - Reinstall Operator and Place Warning Signs

Chamberlain LA100
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gate Travel
Path
Moving Gate Can Cause
Injury or Death
KEEP CLEAR! Gate may move at any
time without prior warning.
Do not let children operate the gate or
play in the gate area.
This entrance is for vehicles only
Pedestrians must use separate entrance
WARNING SIGN PLACEMENT
Warning placards MUST be installed on both sides
of the gate and in plain view.
10
REINSTALL OPERATOR TO GATE
Reinstall operator to the post and gate brackets securing with the hairpin clips. Once you have verifi ed that the
operator is level and the 1/4" gap between the operator and the extension bracket has been maintained, tighten
all of the post and gate bracket supporting hardware.
IMPORTANT NOTE: When tightening the ribbed neck bolts that hold the extension bracket to the post bracket,
it is necessary to alternate between the bolts when tightening to ensure a correct alignment and to ease the
drawing of the bolts through the brackets.
9
17 Installation
Fence
Gate
Gate Post
Hairpin Clip
To prevent SERIOUS INJURY or DEATH from a moving gate:
Install warning signs on the front and back of the gate
in PLAIN VIEW.
Permanently secure each warning sign in a suitable
manner using fastening holes.

Related product manuals