Chamberlain LA350 - Tools Needed; Gate Operator and Control Box Wiring Overview

7
Overview of Gate Operator and Wiring for Control Box
Tools Needed
LA350
Gate Operator
with 1000 mm
cable
Cable for
Photoelectric Sensor:
4 X O.5 mm2 or
2 X O.5 mm2 (optional)
Extension Cables
for MOTO2:
2 X 1.0 mm2
(not supplied)
Cable for Flashing
Light: 2 X 1.O mm2
(optional)
Remote
Control
FA42LM
Flashing Light
(optional)
FA70LM
Control Box
LA350
Gate Operator
with 1000 mm
cable
Power Cable:
2 X 1.5 mm2
Cables for
MOTO1
& MOTO2:
2 X 1.0 mm2
FA31LM Photoelectric
Sensor (optional)
Cable for
Photoelectric
Sensor:
4 X O.5 mm2
or 2 X O.5 mm2
(optional)
Junction Box
(not supplied)
FA31LM Photoelectric
Sensor (optional)
Cables used must meet all National and Local Codes for outdoor use.
INTRODUCTION