Chamberlain LA350 - Post Bracket Installation and Dimensions; Gate Operator Dimensions

9
6. Using the post bracket as a reference, mark and drill the holes for the post bracket.
7. Attach the post bracket with the M8x60 screws, washers, and nuts.
8. The slots on the post bracket allow for alignment. When the post bracket is level tighten the nuts.
Level
Drill hole
M8x60 screw
Washers
Nut
55 mm
115.3 mm
93.5 mm
95 mm
835 mm
350 mm
Dimensions of Gate Operator
INSTALLATION