Champion CSE37 - Electronic Controller

Champion Compressors Pty. Ltd. Manual No. 975425 Rev. C
33
6.5 Electronic Controller
The compressor electronic controller is mounted in the door of the electrical
cubicle, which is located in the upper right hand corner of the compressor.
The layout of the electronic controller is shown in Figure 8 .
The electronic controller has a digital display capable of displaying several
parameters at once. All key compressor operating parameters can be viewed
on the display by scrolling through using the keypad Up and Down buttons.
Functions and features of the electronic controller include:
• LCD digital display
• Start Button
• Stop Button
• Reset Button
• Parameter and Menu Navigation
• Status LED
• Fault LED
• Pressure and Temperature Display
• Status Display - Running, Loaded, Run On, Standby, Faults, Alarms
• Run and Loaded Hours
• Average load cycle
• Display of service element hours remaining
• Numerous built in compressor protection features
The information in this manual is intended as a basic overview of the
functions of the electronic controller. For more detailed information, please
obtain a copy of the “Electronic Controller Advanced Configuration” manual
from Champion Compressors Customer Care Division.