Front Panel Operation
27
Click Enter button to back to
the top-level menu.
Click Enter button to enter
the second-level menus.
Indicates the current data
logging status: Static Off or
Static On.
Click Enter button to change
the data logging status.
Indicates the duration of
data logging.
Click Enter button to change
the measurement interval.
The available options are:
0.2s, 0.5s, 1s, 2s, 5s, 10s,
15s, 30s, and 60s.
Click Enter button to change
the mask degree from 0
degree to 15 degrees.
Click Enter button to enter
Duration Time Setting
screen.
In the Duration Time Setting
screen, click Fn button to
move to the character of the
duration time value you
want to make change, and
then click Enter button to
change from 0 to 9. After the