CHCNAV i70+ - Page 26

Front Panel Operation
26
Wlan Status On Wlan Mode
HotSpot
 Indicates the Wi-Fi status.
 Click Enter button to change
the status, and then click Fn
button to cancel the change,
or click Enter button to
confirm the change.
Dial Status Offline
 Indicates whether the
receiver has been connected
to cellular network.
 Generally, when the SIM
card has been inserted
before the receiver is turned
on, this menu will be
displayed as “Dial Status
Online”.
Cancel
 Click Enter button to back to
the top-level menu.

Mode Rover
UHF
 Click Enter button to enter
the second-level menus.
 Indicates the current
working mode.
Base Cable
 Click Enter button to enter
the configuration screen of
the selected working mode.
 More operation information,
see 3.2. Configure the
working mode.
Base Int. UHF
Base APIS
Base APIS & Cable
Rover APIS
Rover Ntrip/IP