CHCNAV i70+ - Page 36

Front Panel Operation
36
Protocol CHC
 Indicates the current protocol.
OK
 Click Enter button to save the
settings and back to the
top-level menu, and then this
working mode will take effect.
Cancel
 Click Enter button to cancel
the settings and back to the
second-level menu.
Rover SV Base
Ok
 Click Enter button to enable
LBand function when
TerraStar service is subscribed
Cancel
 Click Enter button to cancel
the settings and back to the
second-level menu.
Note – The operation menus of front panel may vary from different firmware
versions of your receiver. The menus described in this chapter are based on firmware
version 1.1.41.