CHCNAV i70+ - Page 35

Front Panel Operation
35
 Click Enter button to enter the
configuration screen.
Mode Rover Ntrip/IP
 The title of this configuration
screen.
Status Logged
 Indicates current status of
Ntrip: Status Not Logged or
Status Logged.
 Users need to use the web
interface to configure the
settings to log on Ntrip (see
7.5.1. IO Settings submenu →
RTK Client for instruction)
before.
 Note – Make sure a valid SIM
card has been inserted in the
receiver.
OK
 Click Enter button to save the
settings and back to the
top-level menu, and then this
working mode will take effect.
Cancel
 Click Enter button to cancel
the settings and back to the
second-level menu.
Rover UHF
 Set up the receiver as a rover
station using internal UHF.
 Click Enter button to enter the
configuration screen.
Mode Rover UHF
 The title of this configuration
screen.
Channel 1
 Click Enter button to change
the channel from 1 to 9.