EasyManua.ls Logo

CHCNAV RS10 - Using Requirements; Using Environment; Tips before Using; Tips During Using

CHCNAV RS10
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHCNAV RS10 USER MANUAL | 2024-04 P a g e | 5
Customer should use default batteries and accessories. The use of non-original accessories
is not eligible for warranty; if occur accident, the manufacturer will not bear the corresponding
responsibility.
2 Using Requirements
2.1 Using Environment
It is not recommend to use in rainy, snowy, or foggy weather for safety. Also the point cloud
data will have more noise.
It is not recommend to frequently use in dusty environment, which will affect the service
life of equipment.
It is forbidden to expose the device and accessories under extreme temperature. The
environment temperature must not be lower or higher than the specification temperature.
2.2 Tips Before Using
Check whether the laser glass is normal, if there is dust exist, please use the cleaning kit to
clean it.
Check whether the batteries, LT800 tablet has sufficient power.
2.3 Tips During Using
After powered on, check whether the connection between LT800 tablet and equipment is
normal, and whether the status of tracking satellite and board is normal.
Before start work, check the remaining capacity of the data memory card. If the remaining
capacity is less than 10% or does not meet the current collection capacity requirements, the
old data file need to be deleted in advance.
2.4 Tips After Using
After using, place the equipment into equipment case and accessories into accessory case.
During transportation, take care the equipment and try to avoid bump.

Related product manuals