Chery A11 2003 - Page 544

CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual
ssembly procedure:
Install the outer racer of the
differential’s tapered roller
ing outer racer remover and
assembler);
Install the odometer’s drive gear
case;
Install the outer racer of the input
shaft’s tapered roller bearing with
KA-002-111 (bearing outer racer
assembler);
Install the converter case on the
transmission;
on the
Spe
A-000-060 bearing remover
A-000-299 bearing remover
A-000-300 bearing assembler
isassembly procedure:
Remove the automatic
A
1.
bearing with KA-002-298
(bear
2.
3.
4.
5. Install the assembled
automatic transmission
vehicle.
Differential
cial tool:
K
K
K
D
1.
112