Chery A11 2003 - Page 707

Chery SQR7160 series sedan ABS system－fault diagnostic and repairing
7 Code 01130 Possible causes
［Note］When ABS is interrupted by high frequency electromagnetic wave
or micro prcrosser recognized an incrorrect input speed signal, code is set.
● high frequency electromagnetic
wave interference
damaged sensor or sensor harness.
● defective ABS ECU
No
N
ot normal
Replace sensor
Check sensor
N
ormal
Check sensor output voltage
Check wiring harness
between ECU and sensor.
N
ormal
Replace ABS ECU
16