Infotainment System 7-33
Eject USB: Press when the USB
is to be removed. If the USB is
disconnected without selecting
Eject USB, the files could become
corrupted.
Playing from an iPod
®
This feature supports the following
iPod models:
.
iPod (fifth generation or later)
.
iPod nano (first, second, third,
fourth, and fifth generation)
.
iPod classic
.
iPod touch (first and second
generation)
For proper operation, make sure
the iPod has the latest firmware
from Apple
®
. iPod firmware can be
updated using the latest iTunes
®
application. For more information,
visit www.apple.com/itunes.
Recording from the iPod to the
HDD is not supported. Media must
be recorded using a USB mass
storage device.
To connect and control an iPod,
connect one end of the standard
iPod USB cable to the iPod's dock
connector. Connect the other end to
the USB port in the center console.
iPod music information displays
on the radio’s display and begins
playing through the vehicle’s audio
system.
The iPod battery recharges
automatically while the vehicle
is on. When the vehicle is off while
an iPod is connected using the iPod
USB cable, the iPod battery stops
charging and the iPod automatically
turns off.
If the iPod is an unsupported
model, it can still be listened to
in the vehicle by connecting to
the auxiliary input jack using a
standard 3.5 mm (1/8 in) stereo
cable. See Auxiliary Devices on
page 7‑38 for more information.
iPod Music Menu
Press any of the following buttons
on the iPod Music Menu to display
the corresponding screen:
Shuffle:
1. Press to play the tracks
randomly rather than in
sequence.
2. Press the button again to stop
this function.
To Next Page
Loading...
